Back to Section 3
Step 23: Test fit the chassis. I've gone a bit far, so the next 2 steps will refer back to this pic. Note the nuts going through the laptop at the top:
Step 24: Cut the top cover removing the unneeded speakers leaving the power switch. I've left the other 2 switches there as the 3 switches share the same circuit board. Refer to pic 23.
Step 25: Obtain a strip of aluminium and cut a bit and bend to make into legs and attach to the plywood to make the frame stand up.
Step 26: Assemble the whole she-bang:
Step 27: ... and admire!
Step 28: Pray down to your mighty mate who gave you the laptop:
Step 29, and the final step: Wait 3 years for your better half to *finally* use the bloody thing....